 |
MAUND SPEED T SHIRT
Quality heavy weight 100% cotton shirt with screen printed artwork available in small, medium, large, xl and xxl .
$16 + shipping $4
|
|
 |
| TEARDROP FINNED INVERTED LEVERS
AVAILABLE FOR 7/8 AND 1 INCH HANDLE BARS. CABLES RUN
INTERNAL THROUGH BARS. LEVERS HOOK UP TO STANDARD
CONTROL CABLES.
$186 + $6 Shipping
|
|
 |
SMOOTH TRADITIONAL INVERTED LEVERS
AVAILABLE FOR 7/8 AND 1 INCH HANDLE BARS. CABLES RUN
INTERNAL THROUGH BARS. LEVERS HOOK UP TO STANDARD
CONTROL CABLES.
$186 + $6 Shipping
|
|
 |
INVERTED LEVERS
AVAILABLE FOR 7/8 AND 1 INCH HANDLE BARS. CABLES RUN INTERNAL THROUGH BARS. LEVERS HOOK UP TO STANDARD CONTROL CABLES AND OFFER AN EXTENDED CABLE PULL. POLISHED FINISH AND INDIVIDUAL LEVERS AVAILABLE ON REQUEST .
$186 PAIR $6 SHIPPING
|
|
 |
AMAL CARB. EXTENSIONS
1 PAIR OF CARB. EXTENSIONS AND STUD SET. FITS TRIUMPH
BONNEVILLE ,BSA A65 ,OR ANY BIKE WITH AMAL 930
CONCENTRIC OR MONO BLOCK 389 CARBS. 1 INCH THICK, 2 INCH
HOLE PITCH.
$56 + $7 Shipping |
|
 |
VELOCITY STACK AMAL
RADIAL FINNED VELOCITY STACK WITH INTEGRAL BRASS FILTER SCREEN. 2 1/2 INCH LONG . THREADED AND AVAILABLE FOR ALL SIZE AMAL CARBURETORS . CUSTOM MACHINED ON REQUEST FOR ALL BRANDS OF CARBURETORS.
$37 + $6 SHIPPING
|
|
 |
MOTO GUZZI SIDE PANEL GRILLS
T3 ,G5,CONVERT AND SPADA ALL NEED THESE AIRCRAFT GRADE
CASTINGS .ATTACH USING FACTORY HOLE PATTERN SUPPLIED
WITH 4 SCREWS EACH.
$80 Pr + $7 Shipping |
|
  |
TRIUMPH FORK TUBE SHROUDS
HI POLISHED CAST ALUMINUM FORK TUBE COVERS .15 INCHES
LONG. FIT TRIUMPH 500 AND 650CC MODELS 1963 - 70
$154.00 + $16 Shipping |
|
  |
BSA FORK TUBE SHROUDS
POLISHED ALUMINUM COVERS 15 INCHES LONG . FITS A50, A65
AND GOLD STAR MODELS 1962 -70
$154.00 + $16 Shipping |
|
|
LICENSE PLATE /TAIL LIGHT BRACKET
CAST ALUMINUM BRACKET FITS A 4 X 7 INCH PLATE AND A
LUCAS TYPE TAIL LIGHT
AVAILABLE IN VERTICAL AND HORIZONTAL
$33 + Shipping $7
|
|
 |
TRIUMPH 650 MOTOR MOUNT PLATES
TOUGHENED ALUMINUM CHANNEL SECTION FINNED MOTOR PLATES
.FIT 650 C.C. UNIT CONSTRUCTION MODELS 1963 -70 .FOR
RIGID FRAME ONLY .
$125 + $9 Shipping POLISHED
$95 + $9 Shipping CAST FINISH
|
|
 
|
QUADRANT BRACKET
Sprocket huggin" side mount license plate/light bracket .Fits in real tight so as not to interrupt lines of bike .The spur allows a wide range of lamps to be fitted . Mounts either side and fully adjustable . Fits 4"x7" Plate .
$110 + Shipping $9
|
|
 |
TRIUMPH DUAL CARBURETOR ADAPTERS
TRIUMPH DUAL INTAKE ADAPTER MANIFOLDS. DUAL CARB ADAPTERS FIT ALL 500cc PRE UNIT HEADS AND ALL 650 PRE UNIT & UNIT CONSTRUCTION SINGLE CARBURETOR HEADS. ALSO FITS TR7 750cc .
INCREASE PERFORMANCE WITH 45 DEGREE SPLAYED PORT DESIGN ALLOWING ADEQUATE CLEARANCE FOR VELOCITY STACKS OR FILTERS THAT IS NOT POSSIBLE WITH SINGLE CARBURETOR MANIFOLD.
$132 pair + shipping $6
|
|
 |
Brake Vents
Keep your brakes cool and prevent brake fade. Vents fits 7-9" brake plates. All screws are stainless steel. They are simple to attach and fit Triumph, BSA, Honda and Yamaha to name but a few. Available in 3 finishes
|
Polished ...................$58 shipping $5 |
|
|
Burnished aluminum.....$50 Shipping $5 |
|
|
Burnished aluminum screenless $46 shipping $5 |
|
|
|
